Inflatables

Inflatables

8′ Cyclone Inflatable Cone Kit w blower & case 210420
(1) Cyclone Hardware with Soft Carry Case Advertise from all angles with this easy-to set-up outdoor, inflatable display.
(1) 8′ Cone Graphic Heavy-duty internal blower inflates the graphic in seconds.
Plugs in to a standard outlet.
Lightweight base and attached graphic fold up creating a portable display.
Easy to change graphics using hook and loop.
Recommend use of weights inside base for stability.
We cannot guarantee Graphic alignment across any seam.
Seam Locations Two Vertical Side Seams.
Product Size 32 in (W) x 96 in (H) x 32 in (L)
8′ Cyclone Inflatable Tower Kit w case & blower 210410
(1) Graphic Reach potential customers when other types of advertising simply can’t.
(1) Hardware w/Soft Case Graphics attach with hook and loop strips.
(1) Stake Kit Lightweight and portable for indoor and outdoor use.
Dye sublimated knit polyester graphic with two vertical seams.
Graphic stores inside unit.
Plugs into any standard outlet.
Sewn in tabs on side seams for use with included stake kit.
Sandbags and rope needed for securing on hard surfaces (Sandbags not included).
*** Must secure properly to avoid damage.
Failure to secure properly voids Warranty. ***
We cannot guarantee Graphic alignment across any seam.
Seam Locations Two Vertical Seams from top to bottom of graphic.
Viewable Area (One Side) : 49 in (W) x 92 in (H)
Viewable Area (Top) : 30 in (W) x 30 in (H
10′ Cyclone Inflatable Tower Kit w blower & case 210412
(1) Graphic Reach potential customers when other types of advertising simply can’t.
(1) Hardware w/Soft Case Graphics attach with hook and loop strips.
(1) Stake Kit Lightweight and portable for indoor and outdoor use.
Dye sublimated knit polyester graphic with two vertical seams.
Graphic stores inside unit.
Plugs into any standard outlet.
Sewn in tabs on side seams for use with included stake kit.
Sandbags and rope needed for securing on hard surfaces (Sandbags not included).
*** Must secure properly to avoid damage.
Failure to secure properly voids Warranty. ***
We cannot guarantee Graphic alignment across any seam.
Seam Locations Two Vertical Seams from top to bottom of graphic.
Viewable Area (One Side) : 49 in (W) x 114 in (H)
Viewable Area (Top) : 30 in (W) x 30 in (H
10′ Cyclone Inflatable Tower Kit w blower & case 210412
(1) Graphic Reach potential customers when other types of advertising simply can’t.
(1) Hardware w/Soft Case Graphics attach with hook and loop strips.
(1) Stake Kit Lightweight and portable for indoor and outdoor use.
Dye sublimated knit polyester graphic with two vertical seams.
Graphic stores inside unit.
Plugs into any standard outlet.
Sewn in tabs on side seams for use with included stake kit.
Sandbags and rope needed for securing on hard surfaces (Sandbags not included).
*** Must secure properly to avoid damage.
Failure to secure properly voids Warranty. ***
We cannot guarantee Graphic alignment across any seam.
Seam Locations Two Vertical Seams from top to bottom of graphic.
Viewable Area (One Side) : 49 in (W) x 138 in (H)
Viewable Area (Top) : 30 in (W) x 30 in (H
Air Tent Full Kit w pump and case 211181
(1) Inflatable w/ Vinyl Bag Sealing the air inside, this inflatable tent doesn’t require a continuous running blower and promises 100% waterproof performance.
(1) Dye-Sub Canopy Tent must be secured down to prevent wind from lifting tent and causing damage
(4) Dye-Sub Corners ***Damage from Not securing tent properly voids the Warranty***
(4) Dye-Sub Dome Walls The tent inflates via a single valve for quick and easy set up.
(1) Electric Air Pump Top to bottom dye sublimated graphic pptions give your messgae a large platform to be seen from every angle.
(6) Stakes and Rope Product Size : 116 in (W) x 117 in (H) x 116 in (L)
Arch Inflatable Kit w blower 211051
(1) Dye-Sub Full Bleed Top Wrap Create a grand entrance with inflatable archways.
(2) Dye-Sub Full Bleed Side Wraps Constructed from strong PVC-coated nylon, to stand up to outdoor use.
Inflates in less than a minute for quick set up.
Graphics attach using hook and loop, allowing interchangeable messages.
Kit includes a 4 amp blower.
Use the attached rings to secure arch with included heavy duty stakes and rope.
Packages Ships in two packages.
Package 1 Shipping box dimensions: 35 x 15 x 15.
Box dim weight is 41 lbs.
Package 2 Shipping box dimensions: 15 x 16 x 10.
Box dim weight is 13 lbs.
Product Size w/o Tube & Blower 172 in (W) x 120.5 in (H) x 26.5 in (L)
Product Size w/ Tube & Blower 235 in (W) x 120.5 in (H) x 26.5 in (L)
Geodesic Air Display Kit w Poly Knit Cover w pump & case 211151
(1) Inflatable w/ Vinyl Bag A unique shape that offers an innovative take on the traditional event tent.
(1) Super Poly Knit Cover Featuring two canopy materials to choose from; a lightweight, breathable Super Poly Knit or heavy-duty, weather-resistant, 400 Denier Polyester.
(1) Electric Air Pump There is no need for a continous running blower motor, simply inflate the display with the provided air pump and seal the valve shut.
(1) Inflatable Wrapper We cannot guarantee Graphic alignment across any seam
(6) Stakes w/ Rope Seam Locations: All sections of Inflatable
(15) Bungees Tent must be secured down to prevent wind from lifting tent and causing damage.
***Damage from Not securing tent properly voids the Warranty***
Product Size 142 in (W) x 109.75 in (H) x 118.75 in (L)
Jumbo Arch Inflatable Kit w blower 211061
(1) Dye-Sub Full Bleed Top Wrap Create a grand entrance with inflatable archways.
(2) Dye-Sub Full Bleed Side Wraps Constructed from strong PVC-coated nylon, to stand up to outdoor use.
Inflates in less than a minute for quick set up.
Graphics attach using hook and loop, allowing interchangeable messages.
Kit includes a 4 amp blower.
Use the attached rings to secure jumbo arch with included heavy duty stakes and rope.
Packages Ships in two packages.
Package 1 Shipping box dimensions: 35 x 15 x 15.
Box dim weight is 41 lbs.
Package 2 Shipping box dimensions: 15 x 16 x 10.
Box dim weight is 13 lbs.
Product Size w/o Tube & Blower 242 in (W) x 162 in (H) x 37 in (L)
Product Size w/ Tube & Blower 242 in (W) x 162 in (H) x 103 in (L)
LuminAir Inflatable Display Kit w soft case – blower 210390
(1) Hardware in it’s own Soft Case (1) Printed Banner Harness the power of air and light to quietly direct customers your way.
Display inflates over nine feet tall with 360 degrees of advertising space.
Equipped with a quiet internal blower.
Compact and lightweight, sets up in small areas.
Graphic easily zips onto the base.
Control the continuous red, green and blue lights with an on/off button.
One seam, dye sublimated soft knit graphic.
Plugs into any standard wall outlet.
We cannot guarantee Graphic alignment across any seam.
Seam Location One Vertical Seam.
Viewable Area 76 in (W) x 93 in (H
Palace Inflatable Kit w blower 211040
(4) Detachable Leg Graphics Inflate a highly visible space in just five minutes.
(4) Detachable Peak Graphics Made of durable Coated Oxford Nylon making it perfect to use at multiple events.
Easy to attach hook and loop graphics.
Zipper openings on each leg lets you add a weight or sandbag for for extra security.
Kit includes a 3.5 amp blower.
Use the attached rings to secure Palace with included heavy duty stakes and rope.
Includes two permanently attached blank walls with roll-up door and two blank walls with mesh window that are removable.
Packages Ships in two packages.
Package 1 Shipping box dimensions: 25 x 25 x 20.
Box dim weight is 64 lbs.
Package 2 Shipping box dimensions: 19 x 16 x 10.
Box dim weight is 15.5 lbs.
Product Size w/o Tube & Blower 165 in (W) x 180 in (H) x 165 in (L)
Product Size w/ Tube & Blower 165 in (W) x 180 in (H) x 212 in (L)
SuperDome Inflatable Kit w blower 211030
(1) Hardware Kit In under a minute, inflate an even larger branded Dome!
(4) Detachable Leg Graphics Made with durable PVC-coated Oxford Nylon to stand up to multiple uses.
(4) Detachable Peak Graphics Hook and loop strips make it easy to change out graphics.
Kit includes a 3.5 amp blower.
Use the attached rings to secure Superdome with included heavy duty stakes and rope.
Includes two permanently attached blank walls with roll-up door and two blank walls with mesh window that are removable.
Packages Ships in two packages.
Package 1 Shipping box dimensions: 25 x 25 x 20.
Box dim weight is 64 lbs.
Package 2 Shipping box dimensions: 19 x 16 x 10.
Box dim weight is 15.5 lbs.
Product Size w/ Inside Tube & Blower 160 in (W) x 122 in (H) x 190 in (L)
Product Size w/ Outside Tube & Blower 200 in (W) x 122 in (H) x 160 in (L)

Additional

PLEASE SEE TRADESHOW DISPLAYS FOR ADDITIONAL INTERIOR BANNERS (i.e. pop up banners or retractable banners)

To ensure high quality results, it is necessary for you to provide us with the best artwork possible. If the required artwork cannot be provided, our in-house art department can create what you need, at a reasonable price.

Files should be saved in the following formats:

  • Adobe Illustrator (.ai or .pdf with editing capabilities)
  • Adobe PhotoShop (.eps, .psd : Minimum bitmap file size: 100dpi @ 100%)
  • All fonts should be converted to outline.

Disclaimer:

Before placing an order for any of these custom items, you must have obtained all rights to use any and all logo(s) that are trademarked.

Action Advertising & Flags, Inc. will not be held responsible for any improper use of these items. It is your responsibility to provide documentation that you have right to use trademarked logos. This is a custom item, therefore it cannot be returned or exchanged.

Give us an opportunity to earn your business. Call or email for a free quote.